How to solve the problem of the “break ” for micro carbide drills?
How to solve the problem of the “break ” for micro carbide drills?
Table of Contents
That “Click” Sound of Micro Drills Break Just Cost You More
In micromachining process, the most expensive thing isn’t the drill—it’s the scrapped workpiece it leaves behind.
When you’re working with diameters under $0.2mm$, the margin for error is zero. Most shops struggle with “The Snap” because of microscopic T.I.R. (Total Indicated Runout).
The Fix: Is your tool holder runout under $0.002mm$? If not, you aren’t drilling; you’re vibrating the tool to death. Stop blaming the carbide and start checking the spindle.
MSU offer high performance micro carbie drills which made by extra fine grain size carbide, and strictly controlled tolerance and runout during the production. it will be not break during the micro drilling process if your cutting parameters fixed well and achieve high efficiency drilling.
Please click MSU carbide dirlls for detailed information.
Recent Post
How to Choose the Right End Mill for Aluminum？ 06 Jul 2026 
2 Flute vs. 4 Flute End Mills: Which One Should You Choose? 15 Apr 2026 Questions about this topic?
Our engineers are happy to advise on tools, grades and cutting parameters.